Fiberpartner is a modern company with trading activities throughout
the world. Fiberpartner is active in staple fibers in polyester,
polypropylene, and bicomponents as well as technical yarns in polyester
and polyamide, and plastics in PET and PP. A worldwide network across
rawmaterials, machinery and finished products makes Fiberpartner
unique. Polyester Industrial yarns from Fiberpartner are widely applied to industrial
textiles. The high tenacity and if required low shrinkage properties
has achieved global recognition for consistent and high quality.

Polyester high tenacity yarn is used for high performance applications
where tenacity is the key factor with Den 210 – 6000 den, intermingled,
twisted, and multicompact up to 220.000 Dtex, Dope dyed colour, Low
elongation, abraision resistant, adhesive activated, low elongation.
Their application includes webbings, narrow fabrics, cordage, deep sea
moorings, ropes, nets, strapping, slings, geotextiles, seatbelts,
firehose, hose, filtration. Low shrinkage polyester
yarn is used where tenacity, yet a low heat shrinkage is required with
220 – 2000 den, Shrinkage from  1,6% - 3,5%, Intermingled, twisted and
multicompact up to 220.000 Dtex, Low shrinkage, HMLS, adhesive
activated. Its application includes PVC coated materials, taupaulins,
tirecords, filtration, firehose, Geotextiles. High modulus low
shrinkage yarn is especially designed for tirecord with high
performance with the characteristics of 1000-1500 den, Intermingled
& twisted features. Its application includes tire cord, conveyer
belt, canvas. High tenacity PA6 yarns is used for industrial
applications where high tenacity and medium elongation is required with
features like 840 – 1890 den, Intermingled. Its application includes
nets, ropes, cords, narrow fabrics.

Fiberpartner offer on regular bases very good quality near prime
quality of polyester Low Melt Fibers. It is produced by bicomponent
spinning of general polyester and modified polyester, can be melted at
lower temperature with 110~200 degree centigrade than normal fiber and
bonded with other one. It is suitable for cleaning fiber suspension
with the consistency of 0.4-1.2%. It can efficiently remove light
impurities, hot melt impurities, pulp rejects, heavy impurities etc. In
addition, it can also remove foam plastic, cork fragments. They are
produced by bicomponent spinning of PET/ Co-PET, Can be 100% recycled,
with excellent heat bonding property, easy mixing property with other
fiber, with excellent washing procedures. Low Melting Fiber are usually
bonded with other fibers by melting at lower temperature then normal
fiber. Their features includes low melting point and high adhesion and
good laundry resistance. Fiberpartner supplies Low melt fiber/ tow
waste in good quality on regular basis.